RoboticVideos Robots

Goudsmit Magnetics / RobofrOK – Run Okay production for magnet assemblies – robot simplifies the production process of magnet assemblies and increased the quality assurance of the magnet assembly

183views

Goudsmit Magnetics Group BV

Robot simplifies the production process of magnet assemblies. In addition, the LEAN working method increased the quality assurance of the magnet assembly and eliminated the problems that a manufacturer experiences.

Goudsmit can contribute to the process at an early stage in finding the most suitable production method for the magnet system, which can be tested immediately with 3D magnet calculations and rapid prototyping.

The LEAN working method that Goudsmit applies at the same time improves the quality assurance of the magnet assembly and avoids waste. This means more efficiency and less failure. The robot also overcomes all the problems that one
The producer participates in the assembly of a magnetic system, as the union of magnetized parts that stick together. An additional advantage is that Goudsmit can contribute to the process at an early stage to perform the most suitable production method for the relevant magnetic system and can immediately test it with 3D magnet calculations and rapid prototyping.

The assemblies made by the RobofrOK process include magnetic clamps but also magnetic coils, joined magnetic segments or sandwich systems for the high-tech and automotive market. For magnetic components, Goudsmit has the ISO 9001: 2008, ISO / TS 16949: 2009 and AS 9100C certifications and the company strives to make these certifications for the production environment. This is also important for the aforementioned industries.

. This is a very laborious process and each subsequent magnet experiences more resistance; The more magnets, the stronger the total package becomes. Goudsmit first processes the magnets, after which the magnetization takes place during the process. A conveyor belt enters the segments, after which the robot picks them up. Then, the magnetic segment goes through a camera to see if it has no break or crack and finds its way to the magnetization coil. After this, the robot places the segments one by one in the tool unit where they are assembled and pasted. The robot is not linked to a magnetic format and therefore flexible.

Source video, image and text: Goudsmit Magnetics Group BV

Source web text: Goudsmit Magnetics

Leave a Response

ArabicChinese (Simplified)EnglishFrenchGermanHindiPortugueseRussianSpanish